|
Edstrom Water System |
|
Installing your watering system is easy. Once you have all of
the components you need, grab a pair of scissors and get started! Step 1: Cut black tubing to appropriate length for cages and push the tubing into the Tee Barbed Fittings. 
Step 2: Slide the barbed connection of the drinking valve through hole in the Valve Clip and squeeze clip onto the cage. 
Step 3: Place drinking valve on the side of the cage where it will be easily accessible to your animal or bird. Attach supply line to cages with Stand-Offs 
Step 4: Extend additional short length 3/16" Flex-Tubing from the bottom of the Tee Barbed Fitting down to the drinking valve. 
Step 5: Place the Drain-Vent at the end of the line for flushing purposes. 
Step 6: If a Shut-Off Valve is desired, it is pushed onto the Flex-Tubing at the beginning of the line to easily turn off water for individual rows. 
Step 7: Connect the beginning of the Flex-Tubing to the water supply. If a storage or float tank is used, it should be placed 12-36" above the top row of cages to ensure adequate water pressure. If a pressure regulator is used just connect it to garden hose then connect tubing to it. 
|
